new file mode 100644

@@ -0,0 +1,105 @@

+/*******************************************************************************

+ *

+ * HAL_PMM.h

+ * Power Management Module Library for MSP430F5xx/6xx family

+ *

+ *

+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/

+ *

+ *

+ *  Redistribution and use in source and binary forms, with or without

+ *  modification, are permitted provided that the following conditions

+ *  are met:

+ *

+ *    Redistributions of source code must retain the above copyright

+ *    notice, this list of conditions and the following disclaimer.

+ *

+ *    Redistributions in binary form must reproduce the above copyright

+ *    notice, this list of conditions and the following disclaimer in the

+ *    documentation and/or other materials provided with the

+ *    distribution.

+ *

+ *    Neither the name of Texas Instruments Incorporated nor the names of

+ *    its contributors may be used to endorse or promote products derived

+ *    from this software without specific prior written permission.

+ *

+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT

+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+ *

+ * Created: Version 1.0 11/24/2009

+ * Updated: Version 2.0 12/15/2010

+ *

+ ******************************************************************************/

+

+#ifndef HAL_PMM_H

+#define HAL_PMM_H

+

+#include "HAL_MACROS.h"

+

+/*******************************************************************************

+ * Macros

+ ******************************************************************************/

+#define ENABLE_SVSL()        st(PMMCTL0_H = 0xA5; SVSMLCTL |= SVSLE; PMMCTL0_H = 0x00;)

+#define DISABLE_SVSL()       st(PMMCTL0_H = 0xA5; SVSMLCTL &= ~SVSLE; PMMCTL0_H = 0x00;)

+#define ENABLE_SVML()        st(PMMCTL0_H = 0xA5; SVSMLCTL |= SVMLE; PMMCTL0_H = 0x00;)

+#define DISABLE_SVML()       st(PMMCTL0_H = 0xA5; SVSMLCTL &= ~SVMLE; PMMCTL0_H = 0x00;)

+#define ENABLE_SVSH()        st(PMMCTL0_H = 0xA5; SVSMHCTL |= SVSHE; PMMCTL0_H = 0x00;)

+#define DISABLE_SVSH()       st(PMMCTL0_H = 0xA5; SVSMHCTL &= ~SVSHE; PMMCTL0_H = 0x00;)

+#define ENABLE_SVMH()        st(PMMCTL0_H = 0xA5; SVSMHCTL |= SVMHE; PMMCTL0_H = 0x00;)

+#define DISABLE_SVMH()       st(PMMCTL0_H = 0xA5; SVSMHCTL &= ~SVMHE; PMMCTL0_H = 0x00;)

+#define ENABLE_SVSL_SVML()   st(PMMCTL0_H = 0xA5; SVSMLCTL |= (SVSLE + SVMLE); PMMCTL0_H = 0x00;)

+#define DISABLE_SVSL_SVML()  st(PMMCTL0_H = 0xA5; SVSMLCTL &= ~(SVSLE + SVMLE); PMMCTL0_H = 0x00;)

+#define ENABLE_SVSH_SVMH()   st(PMMCTL0_H = 0xA5; SVSMHCTL |= (SVSHE + SVMHE); PMMCTL0_H = 0x00;)

+#define DISABLE_SVSH_SVMH()  st(PMMCTL0_H = 0xA5; SVSMHCTL &= ~(SVSHE + SVMHE); PMMCTL0_H = 0x00;)

+

+#define ENABLE_SVSL_RESET()       st(PMMCTL0_H = 0xA5; PMMRIE |= SVSLPE; PMMCTL0_H = 0x00;)

+#define DISABLE_SVSL_RESET()      st(PMMCTL0_H = 0xA5; PMMRIE &= ~SVSLPE; PMMCTL0_H = 0x00;)

+#define ENABLE_SVML_INTERRUPT()   st(PMMCTL0_H = 0xA5; PMMRIE |= SVMLIE; PMMCTL0_H = 0x00;)

+#define DISABLE_SVML_INTERRUPT()  st(PMMCTL0_H = 0xA5; PMMRIE &= ~SVMLIE; PMMCTL0_H = 0x00;)

+#define ENABLE_SVSH_RESET()       st(PMMCTL0_H = 0xA5; PMMRIE |= SVSHPE; PMMCTL0_H = 0x00;)

+#define DISABLE_SVSH_RESET()      st(PMMCTL0_H = 0xA5; PMMRIE &= ~SVSHPE; PMMCTL0_H = 0x00;)

+#define ENABLE_SVMH_INTERRUPT()   st(PMMCTL0_H = 0xA5; PMMRIE |= SVMHIE; PMMCTL0_H = 0x00;)

+#define DISABLE_SVMH_INTERRUPT()  st(PMMCTL0_H = 0xA5; PMMRIE &= ~SVMHIE; PMMCTL0_H = 0x00;)

+#define CLEAR_PMM_IFGS()          st(PMMCTL0_H = 0xA5; PMMIFG = 0; PMMCTL0_H = 0x00;)

+

+// These settings use SVSH/LACE = 0

+#define SVSL_ENABLED_IN_LPM_FAST_WAKE()  st(PMMCTL0_H = 0xA5; SVSMLCTL |= (SVSLFP+SVSLMD); SVSMLCTL &= ~SVSMLACE; PMMCTL0_H = 0x00;)

+#define SVSL_ENABLED_IN_LPM_SLOW_WAKE()  st(PMMCTL0_H = 0xA5; SVSMLCTL |= SVSLMD; SVSMLCTL &= ~(SVSLFP+SVSMLACE); PMMCTL0_H = 0x00;)

+

+#define SVSL_DISABLED_IN_LPM_FAST_WAKE() st(PMMCTL0_H = 0xA5; SVSMLCTL |= SVSLFP; SVSMLCTL &= ~(SVSLMD+SVSMLACE); PMMCTL0_H = 0x00;)

+#define SVSL_DISABLED_IN_LPM_SLOW_WAKE() st(PMMCTL0_H = 0xA5; SVSMLCTL &= ~(SVSLFP+SVSMLACE+SVSLMD); PMMCTL0_H = 0x00;)

+

+#define SVSH_ENABLED_IN_LPM_NORM_PERF()  st(PMMCTL0_H = 0xA5; SVSMHCTL |= SVSHMD; SVSMHCTL &= ~(SVSMHACE+SVSHFP); PMMCTL0_H = 0x00;)

+#define SVSH_ENABLED_IN_LPM_FULL_PERF()  st(PMMCTL0_H = 0xA5; SVSMHCTL |= (SVSHMD+SVSHFP); SVSMHCTL &= ~SVSMHACE; PMMCTL0_H = 0x00;)

+

+#define SVSH_DISABLED_IN_LPM_NORM_PERF() st(PMMCTL0_H = 0xA5; SVSMHCTL &= ~(SVSMHACE+SVSHFP+SVSHMD);PMMCTL0_H = 0x00;)

+#define SVSH_DISABLED_IN_LPM_FULL_PERF() st(PMMCTL0_H = 0xA5; SVSMHCTL |= SVSHFP; SVSMHCTL &= ~(SVSMHACE+SVSHMD); PMMCTL0_H = 0x00;)

+

+// These setting use SVSH/LACE = 1

+#define SVSL_OPTIMIZED_IN_LPM_FAST_WAKE() st(PMMCTL0_H = 0xA5; SVSMLCTL |= (SVSLFP+SVSLMD+SVSMLACE); PMMCTL0_H = 0x00;)

+#define SVSH_OPTIMIZED_IN_LPM_FULL_PERF() st(PMMCTL0_H = 0xA5; SVSMHCTL |= (SVSHMD+SVSHFP+SVSMHACE); PMMCTL0_H = 0x00;)

+

+/*******************************************************************************

+ * Defines

+ ******************************************************************************/

+#define PMM_STATUS_OK     0

+#define PMM_STATUS_ERROR  1

+

+/*******************************************************************************

+ * \brief   Set Vcore to expected level

+ *

+ * \param level     Level to which Vcore needs to be increased/decreased

+ * \return status   Success/failure

+ ******************************************************************************/

+extern unsigned int SetVCore(unsigned char level);

+

+#endif /* HAL_PMM_H */